mastercam X5

[Bada Bing]

Hello all,

Can anyone tell me if I can make a stock boundary simulating a casting around a 2D parrt drawing in MC-X5 lathe and how to do it?

Thanks in advance,

[metlshpr]

If you have the casting modeled, you should be able to set that as your stock.

[tornero32]

if you have the geometry of the casting, go to operations manager, stock set up, properties, geometry and pick revolve, click on select geometry. your geometry should be a close chain.

[Bada Bing]

thanks for the advice guys, I will do it!