Where do I start (Free tutorials)

[stinkfist]

Hello,

I have been off using MasterCam for a few years. I now, do to the economy had to go back to my MasterCam duties. I used V9 and older alot for about 10 years. Also alot of SmartCam. I have played around a bit with the new X,3,4,5. I need to get current. I will be working in a couple weeks. I am a journeyman machinist and have been a supervisor and lead in many shops. I also was in the sales for indexable carbide for 5 years. My latest job will be in a high end injection mold and punch tool and die shop. What would be the fastest and best way to start practicing with the new X5 with Mill 3D surfacing , lathe and getting used to working with X5? They told me they don't use solids because there is no benefit for it so it will be wire frame 3D surface stuff. Also will be some 4th axis stuff. I have ran and set up 3/4/5 axis machines and just about every brand or make out there. Thanks

[cadcam]

you got the answers over on the Mastercam forum.. I would also look at tips for Manufacturing you can find the link here and also Apprentice.net and there are more option. Oh like MastercamU.