Need Help!- SD card..

[larrym574]

I'm trying to get this Mastercam thing going here at work, but I am having trouble getting the programs to the machine. When I try to load the program from the card to the machine I get an error stating: Disk is not formatted. Do I need to format the disk or is it a code issue within the program?

[larrym574]

Oh yeah, If I have to format the card, how do I?

[Bmac991]

Go to my computer find the card drive
Right click a menu will pop up look for format
Press it, Another menu will pop up look for qiuck format
And format the card in fat32 format that should do it.
Oh yeah safe anything you need on the card before formatting.

[Superman]

Question:
You were able to load the actual files onto the card at the PC ? yes ??

But you cannot get the info from the card into the machine control ?

If all are YES,,,then the control cannot read DOS and therefore must have a different, incompatable Operating System...there may be another option on the control to be able to READ a DOS formatted media disk
Formatting the card is not the solution...yet

the machine & control is .... ??
answer this question may get you the right procedure

The correct solution should be in your machine operation manuals