i did somethig stupid

[ghostlx]

hello every on
I some how lost my tool bar can some one tell me how to get it back.
when i process the g code i don't have the tool bar at the top. pic 1 shows the tool bar at the top pic 2 its gone . i don't know what i did but i need help to fix it
thanks in advance
ghostlx

[Superman]

R-click in the grey area, where the t/bar was, to get the options up to turn it back on

[ghostlx]

Originally Posted by Superman R-click in the grey area, where the t/bar was, to get the options up to turn it back on

their is no gray area, tried but no luck any outher suggestions in need to be able to edit the g code and all the edit features are gone .I dont eaven know what i did to make it go away ????????
i can see the tool bar pop up for a couple of seconds then it goes away how can i make it stay so i can edit the g code
on another machine i can do what you tell me to. the rt /click works brings up a dialouge box but with out the gray area you cant get the diaalog box
this smells
ghostlx

[foxsquirrel]

I tried to shut it off in hopes of finding how to turn it back ono but could not find it, it seems odd. Try dragging around the edges, sometimes windows like to play tricks.

[ghostlx]

Originally Posted by foxsquirrel I tried to shut it off in hopes of finding how to turn it back ono but could not find it, it seems odd. Try dragging around the edges, sometimes windows like to play tricks.

have tried every thing i can think off but no luck yet. is their away to do a reset ?
to restore to factory speck's
thanks for trying
ghostlx

[foxsquirrel]

go into mc's system configuration, start/exit, editor, (drop down and select cimco edit) that should get you an different editor.

[ghostlx]

Originally Posted by foxsquirrel go into mc's system configuration, start/exit, editor, (drop down and select cimco edit) that should get you an different editor.

thanks for the help but i do not have that option, cimco it is not their
I have pfe32, mc edit, mcxstart, notepad and outher
the funny thing i can see the normal mastercam editor but it only stays on top of the screen for about 2 seconds and then its gone . it flashes on with all the toolbars and then it is gone .
the really strange thing is i dont know how i did this
thanks for you time
thing that realy make you say hummmmmmmmmmmmm ?
ghostlx

[foxsquirrel]

What version are you using? Mine is X3 and it had to be on the factory disc because the machine I am using had a fresh install of everything and Cimco is their. You might have a corrupt file, if you have all your settings backed up just do a repair off the original disc. Sometimes that is alot faster than diddling around.