Newbie- Help with MC Lathe and canned thread cycle post.

[btu44]

I'm trying teach myself lathe programming with X3 lathe and things are coming along OK.

The question I have is the output of the post for a G76 thread cycle.
My Machine Definition is the Generic FANUC Lathe 2x.

This is an example of the code for a 5/16x18 thread.

N100 G20
(TOOL - 3 OFFSET - 3)
(STYLE E TPMM-221 INSERT - TPMR-221)
N101 G0 T0303
N102 G97 S400 M03
N103 G0 G54 X.5125 Z.214
N104 G76 P020029 Q0. R.005
N105 G76 X.2443 Z-1. P341 Q100 R0. E.05556
N106 G28 U0. W0. M05
N107 T0300
N108 M30

Notice the E.05556 in line N105. I believe this should be a F.05556. My controller will error out until this is changed to a F.
If I select in MC, the Longhand NC code format. It will generate a G32 but will still have an E. instead of an F. for feed.

Is there some setting I have wrong?

I suppose I could do Find and Replace in the post editor but I prefer not too.

Thanks for the help,

[Monkey King]

Edit your post.
If you need any information, go to eMastercam | Your Online Mastercam Source