lathe drill canned cycle output bad

[coykiesaol]

Just got X5.

My generic 2 axis lathe post used to work fine.

Now with a peck drill cycle it outputs

(SPOT TOOL .75 DIA.)
G0 T0404
G97 S500 M03
G0 G54 X0. Z.25
CUSTOMIZABLE DRILL CYCLE X0. Z.25
G28 U0. W0. M05

Anyone know what is wrong?

[Perfect Circle]

Here is what I get.
Hope this helps.
%
O00001
N01 G98 G90 G80 G40 G20
N02 G00 G28 U0. W0.
N03 G54 G97 T0707 M04
N04 G50 S400
N05 G97 S400
N06 G00 X0. Z.25 M08
N07 G74 X0. Z-3. I0. K0. F.01
N08M09
N09 G97
N10 T0700
N11 M01
N12 G00 Z5.
N13 X5.
N14 M05
N15 G28 U0. W0.
N16 M30
%

[larrygk]

I am on looking for the same answer. I have exactly the same problem.

[WallyL7]

Going to X5 shouldn't have changed the way your drill cycle works...

Your posts need to be modified, and you may have the wrong posts to start with. Both of you guys should get with your reseller and go over the basics of posts with them. They may be able to get you rolling free of charge with some simple post mods...

I hate to send you into post modification on your own since there is a serious potential for disaster if you change something you shouldn't change...