| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Mastercam Discuss Mastercam software here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
12-03-2010, 01:10 AM
| |||
| |||
Hi We have a largeish MCM20 with 5 sided head. At the moment the machine is not picking up the tool offset on side work and the operators are using individual work offsets for each tool on side operations. Apparently the machine used to work as advertised, but now doesn't. Anyone familiar with these machines? cheers  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- osp5000m | stonehengemfg | Okuma | 4 | 06-12-2010 09:39 AM |
| Circuit diagrams for an Okuma OSP5000M | G00 | Okuma | 0 | 01-28-2009 04:12 AM |
| Need Help!- Okuma OSP 2200 Control | cnccontrols | Okuma | 3 | 01-27-2009 05:02 PM |
| takisawa ts-20 Fanuc 10t Paramater list | Osmanselim | Fanuc | 3 | 08-28-2008 04:17 AM |
| Need Help!- osp5000m parameter | Hwangbogeun | Okuma | 0 | 08-09-2008 06:31 PM |
| | |
Linear Mode
