Help with .IGS files


Results 1 to 14 of 14

Thread: Help with .IGS files

  1. #1
    Registered
    Join Date
    Oct 2010
    Location
    usa
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Help with .IGS files

    I am just learning CNC and I have a IGS file that I want to write toolpaths on to but it won't let me. I tried create>curves but it only changed about 3/4 of the lines and the ones that did change aren't chaining well. can anyone help me out.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jul 2007
    Location
    Canada
    Posts
    34
    Downloads
    0
    Uploads
    0

    Default

    Hi swannytheswan,
    what version of Mastercam do you use, and your igs file, is it a 2d or 3d drawing. what kind of toolpath do you want to use.



  3. #3
    Registered WallyL7's Avatar
    Join Date
    Dec 2008
    Location
    USA
    Posts
    717
    Downloads
    0
    Uploads
    0

    Default

    Aaahhhh. The joys of the IGES file. This used to be a bear in V9, but I haven't really had many issues in X (most likely since I work with engineers that use solidworks).

    If you can open it up with solidworks or something, just save it as a parasolid, then re-open it with mastercam and it will be a nice simple solid model.

    Tim


  4. #4
    Member cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3578
    Downloads
    0
    Uploads
    0

    Default

    Oh the Iges or it's real name (iguess)

    Wally the Eng use Solid works and give you Iguess files?

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .


  5. #5
    Registered WallyL7's Avatar
    Join Date
    Dec 2008
    Location
    USA
    Posts
    717
    Downloads
    0
    Uploads
    0

    Default

    No. Years ago, when I was at a job shop, the customers would often give us iges files (easiest for them to protect, I believe). That was when we would have to screw around with getting them into a clean format that Mastercam liked.

    My company designs and sells its own product, and we use solidworks. X4mu2 didn't seem to like solidparts very much, and would often give errors when opening. Sometimes I would still have to save them through solidworks as a parasolid(PART.X_T) - - just like the iges needs. Mastercam loves those parts as the file is small but still has what you want for machining.

    Customers still seem to want to give suppliers IGES files, unless asked for another format. Most will comply if you ask them for a different format. It has just been so common in the past, that they tend to give you that one.

    I'm not sure if mastercam will allow you to create a solid out of it, or even save it as a different format(I only have so many hours in a day to mess with things that I can't stand...like igs files...). If you need some help, you can pm me and we can get it cleaned up for you.


    Now that I re-read what you were asking, cadcam...lol ... the simple answer is duh - they use solidworks and give me solidpart files...my bad. Should have explained that.

    Tim


  6. #6
    Registered
    Join Date
    Oct 2010
    Location
    usa
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default

    so I guess I could have given ya'll more info. I have Mastercam X4 the part is a solid but when I bring it up in mastercam it shows it as all surfaces I have tried going to solids>from solids but it isn't changing them all and the ones they do change are rough to chain. Also I don't have solid works so can't open it and save it as a para solid.



  7. #7
    Registered WallyL7's Avatar
    Join Date
    Dec 2008
    Location
    USA
    Posts
    717
    Downloads
    0
    Uploads
    0

    Default

    Again, I've been there with Iges myself. If you can post it here I can try to save it as a parasolid if you want. That would probably solve all your headaches. Mastercam won't like it ever, but solidworks can probably handle the conversion.

    Tim


  8. #8
    Registered
    Join Date
    Jul 2007
    Location
    Canada
    Posts
    34
    Downloads
    0
    Uploads
    0

    Default

    I use IGS file with X4, and I never had problem machining surfaces on my CNC Router, if you want to machine surfaces? what toolpath do you use? if you want to machine surfaces, you got to have level 3 in X4, so you can select all surfaces for machining.



  9. #9
    Member Donkey Hotey's Avatar
    Join Date
    Nov 2007
    Location
    USA
    Posts
    1702
    Downloads
    0
    Uploads
    0

    Default

    Why aren't you using .STP format? I use it daily for Catia V5 conversions as well as Solidworks. IGES is the old, common format. STEP is what you should be using.

    Greg


  10. #10
    Registered
    Join Date
    Jan 2009
    Location
    US
    Posts
    24
    Downloads
    0
    Uploads
    0

    Smile Igs file

    First thing to do with any Igs format file is hit the icon Delete Duplicates. Igs file imports in Mastercam are notorious for creating duplicate entities. You will still have to clean up a few things to get it to chain correctly, but by deleting all duplicate entities will really help with your chaining problems. If that doesn't work one other thing that I have had to do with difficult files is to save them as a DXF format file and then import the DXF file and try using it to chain the boundary. I always hit the icon Delete Duplicates on any format file that I import into MasterCam. Hope this helps



  11. #11
    Registered WallyL7's Avatar
    Join Date
    Dec 2008
    Location
    USA
    Posts
    717
    Downloads
    0
    Uploads
    0

    Default

    You should be good to go with the parasolid I emailed you. Like I said, it is normally just easier to start with a better format...

    There shouldn't be any issue with chaining either, but you may want to delete all lines/arcs/splines, just leaving the solid, then create curve on all edges through mastercam for probably the cleanest toolpaths.

    Hope it helps...let me know.

    Tim


  12. #12
    Member cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3578
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by WallyL7 View Post
    No. Years ago, when I was at a job shop, the customers would often give us iges files (easiest for them to protect, I believe). That was when we would have to screw around with getting them into a clean format that Mastercam liked.

    My company designs and sells its own product, and we use solidworks. X4mu2 didn't seem to like solidparts very much, and would often give errors when opening. Sometimes I would still have to save them through solidworks as a parasolid(PART.X_T) - - just like the iges needs. Mastercam loves those parts as the file is small but still has what you want for machining.

    Customers still seem to want to give suppliers IGES files, unless asked for another format. Most will comply if you ask them for a different format. It has just been so common in the past, that they tend to give you that one.

    I'm not sure if mastercam will allow you to create a solid out of it, or even save it as a different format(I only have so many hours in a day to mess with things that I can't stand...like igs files...). If you need some help, you can pm me and we can get it cleaned up for you.


    Now that I re-read what you were asking, cadcam...lol ... the simple answer is duh - they use solidworks and give me solidpart files...my bad. Should have explained that.
    Ahh you see what I was asking as I alwas bring in the SLDPRT file. Maters on which version you are running of MC and SW to waht version of the SW file you can bring in.
    I am running X5 and support 2011 files.
    Thanks for the offer on the help.. Just so you you know I teach Mc at the local collage and on site at shops and home office training. I teach people how to work with these types and enplane all the different types and what they will do for them and how to handle the info they are given.

    But Iges used to be the bomb back when I started using MC over 20 years ago. PS can tack a iges surface model and change it into a dumb solid. But the file must be water tight like a solid but you can do it.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .


  13. #13
    Member cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3578
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by WallyL7 View Post
    Mastercam won't like it ever, but solidworks can probably handle the conversion.
    I found 90 % of the time MC will bring it in. I have a few times open them in SW. the worst ones are the ones setup wrong and exported out of Pro-e as they allot of controls for the Iges output if not set right you will get missing surfaces and you are stuck trying to use the parent surfaces. But if set right in Pro-e you will get one of the cleanest Iges I have seen.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .


  14. #14
    Member cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3578
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Jaxbubba View Post
    First thing to do with any Igs format file is hit the icon Delete Duplicates. Igs file imports in Mastercam are notorious for creating duplicate entities. You will still have to clean up a few things to get it to chain correctly, but by deleting all duplicate entities will really help with your chaining problems. If that doesn't work one other thing that I have had to do with difficult files is to save them as a DXF format file and then import the DXF file and try using it to chain the boundary. I always hit the icon Delete Duplicates on any format file that I import into MasterCam. Hope this helps
    Agreed you get dup edges from every edge of each surface. so delete dups and then move the wire to another level and use simplify to change as many of the splines into lines and arcs.
    Not to sure about the hole DXF thing. it also maters waht you are trying to chain and what version of MC you are running to give you more answers.
    I know I posted along time ago a video on V9 that should how to squash the wire frame to get a profile. as someone just found it and reminded about it.I think that was in 2003 or something..

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Help with .IGS files

Help with .IGS files