Newbie- MasterCam X2 Chamfering toolpath

[nuai]

Hi guy, this is my first time trying to do a chamfering toolpath with MasterCam X2, When i trying to generate the toolpath i get these warning ( Entry: ramp Contour, chamfer and 3d are not enabled. Upgrade to level 1 is required. ) what these warning really mean and how to make it work ?

[foxsquirrel]

Originally Posted by nuai Hi guy, this is my first time trying to do a chamfering toolpath with MasterCam X2, When i trying to generate the toolpath i get these warning ( Entry: ramp Contour, chamfer and 3d are not enabled. Upgrade to level 1 is required. ) what these warning really mean and how to make it work ?

On the start up splash screen what level does it say you are licensed for?

[nuai]

Hi foxsquirrel,
On the start up splash screen it say : ( Design ,Mill Level 3 ,Lathe Level 3 ,Wire EDM Level 3 ,Router Level 3 ) What is these level mean anyway ?

[Superman]

Originally Posted by nuai On the start up splash screen it say : ( Design ,Mill Level 3 ,Lathe Level 3 ,Wire EDM Level 3 ,Router Level 3 ) What is these level mean anyway ?

It means that the info that you just gave is not right.
Lathe, Router, and Wire levels don't go that high.

Has your installation been done by a reseller, or yourself ?

many reasons can cause that error
- bad installation
- wrong tool selected or defined incorrectly
- wrong settings in the operation

What skill level are you at with CAD and CAM systems ?

[nuai]

Originally Posted by Superman It means that the info that you just gave is not right. Lathe, Router, and Wire levels don't go that high. Has your installation been done by a reseller, or yourself ? many reasons can cause that error - bad installation - wrong tool selected or defined incorrectly - wrong settings in the operation What skill level are you at with CAD and CAM systems ?

Hi, superman
any idea how to fix these problem, BTW my CAD & CAM skill level are acceptable, not that good but i think i can make a part from a drawing to final machining , I'm just trying MasterCam and see how it work.

[Mike Mattera]

"I'm just trying MasterCam and see how it work."

Bootlegger Alert!

Mike Mattera

[cad01]

Originally Posted by Mike Mattera "I'm just trying MasterCam and see how it work." Bootlegger Alert! Mike Mattera

stole the words right out of my mouth.

contact your reseller and try it the right (legal) way.

[nuai]

I just format the whole system and reinstall the program, yep! Superman you are right it just a bad instalation, now don't get the anoying warning anymore. Thank guy for your help.