V9.1 SP1 Release for all 9.1 users


Results 1 to 15 of 15

Thread: V9.1 SP1 Release for all 9.1 users

  1. #1
    Member cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3578
    Downloads
    0
    Uploads
    0

    Default V9.1 SP1 Release for all 9.1 users

    For the people here that are using 9.1 at this time please go to www.mastercam.com and under support and down load the files to update to 9.1 SP1..

    Thanks for your time.

    Similar Threads:
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .


  2. #2
    Registered Rekd's Avatar
    Join Date
    Apr 2003
    Location
    teh Debug Window
    Posts
    1876
    Downloads
    0
    Uploads
    0

    Default

    CADCAM, is your VB Editor opening after the new patch? Mine doesn't. It runs them, but won't open the editor.

    'Rekd teh VB Junkie

    Matt
    San Diego, Ca

    ___ o o o_
    [l_,[_____],
    l---L - □lllllll□-
    ( )_) ( )_)--)_)

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Member cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3578
    Downloads
    0
    Uploads
    0

    Default

    Reked you are correct mine is not working either.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .


  4. #4
    Registered
    Join Date
    May 2003
    Location
    USA
    Posts
    111
    Downloads
    0
    Uploads
    0

    Default

    cadcam,
    What does SP1 refer to?
    I believe VB means visual basic, correct?
    Could you provide a short list of the updates?



  5. #5
    Registered Rekd's Avatar
    Join Date
    Apr 2003
    Location
    teh Debug Window
    Posts
    1876
    Downloads
    0
    Uploads
    0

    Default

    SRT, SP1 is Service Pack 1. It's a patch to "fix" bugs in software. Yes, VB is Visual Basic.. Mastercam 9.1 has the ability now to use Visual Basic Scripting. There's an editor inside Mastercam now for doing that. With the new SP1, that editor doesn't open any more.

    I'm not sure about a list, I'd be interested to see one as well.

    'Rekd teh eRaid!!

    Matt
    San Diego, Ca

    ___ o o o_
    [l_,[_____],
    l---L - □lllllll□-
    ( )_) ( )_)--)_)

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  6. #6
    Registered
    Join Date
    Jul 2003
    Location
    USA
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default

    The Editor is not launching due to the replacement of the MastercamScriptEditor.dll file. This file needs to be registered (which obviously simply unzipping is not going to do). It is very easy to register the file however.

    Open Windows Explorer and browse to the Windows/system32 directory and find the file named regsvr32.exe. Right click on the file and select copy. Browse to your mcam9 directory (or mcam91 as some of you guys have used), paste the file into there. Drag and drop the MastercamScriptEditor.dll file onto the regsvr32.exe file. Now open Mastercam and launch the c-hook.

    HTH

    Paul



  7. #7
    Registered Rekd's Avatar
    Join Date
    Apr 2003
    Location
    teh Debug Window
    Posts
    1876
    Downloads
    0
    Uploads
    0

    Default

    Paul, I tried that last week. I also tried CNCReg.exe, and it didn't work. I also tried reg'ing it via console command line, and every other way I could think of. I finally took the dll from 9.1 and replaced the one from 9.1sp1, now it opens.

    CNC Software is aware of the issue. It's covered in depth over at emastercam.

    'Rekd

    Matt
    San Diego, Ca

    ___ o o o_
    [l_,[_____],
    l---L - □lllllll□-
    ( )_) ( )_)--)_)

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  8. #8
    Member cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3578
    Downloads
    0
    Uploads
    0

    Default

    YMRYL thank you for this thought.
    Just so you know this not the case for all.

    As for me that has not been an issue the install worked just fine.
    So I say that your statment is good for thows that had trouble after the install.

    Also wanted say thanks for bringing in your support.

    Last edited by cadcam; 07-08-2003 at 01:23 PM.
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .


  9. #9
    Registered
    Join Date
    Jul 2003
    Location
    Charlotte NC USA
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default

    Rekd,

    Still not sure why you are unable to register the scripting editor dll, I have had a few guys manually register the file and everything was fine. I'll e-mail you the very latest files and a batch file to register it all for you and that should take care of it.

    :rainfro:

    Kind Regards,
    Aphextwin


  10. #10
    Registered
    Join Date
    Jul 2003
    Location
    USA
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default

    I'm thinking that the reletively few individuals that are making use of the new vb scripting editor that is now in v9 is the reason for the limited number of users reporting the problem. Luckily, we have Aphex here to help us sort it all out. Figured I better let him know about Rekd's problem as his solution fixed me up just fine. I'm sure he'll get him squared away...



  11. #11
    Registered Rekd's Avatar
    Join Date
    Apr 2003
    Location
    teh Debug Window
    Posts
    1876
    Downloads
    0
    Uploads
    0

    Default

    Thanks Aphextwin and Ymryl.

    Aphextwin, email me at fuknrekdATcoxDOTnet.

    Thanks again!

    'Rekd

    Matt
    San Diego, Ca

    ___ o o o_
    [l_,[_____],
    l---L - □lllllll□-
    ( )_) ( )_)--)_)

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  12. #12
    Registered
    Join Date
    Jul 2003
    Location
    Charlotte NC USA
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default

    Rekd,

    Did you get the files and if so did it help?

    Kind Regards,
    Aphextwin


  13. #13
    Registered Rekd's Avatar
    Join Date
    Apr 2003
    Location
    teh Debug Window
    Posts
    1876
    Downloads
    0
    Uploads
    0

    Default

    Yeppers. Got them. Haven't had time yet, will let you know by days end.

    Thanks!!!

    'Rekd

    Matt
    San Diego, Ca

    ___ o o o_
    [l_,[_____],
    l---L - □lllllll□-
    ( )_) ( )_)--)_)

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  14. #14
    Registered Rekd's Avatar
    Join Date
    Apr 2003
    Location
    teh Debug Window
    Posts
    1876
    Downloads
    0
    Uploads
    0

    Default

    That did it. Thanks again. I notice the date on the mcamvb dll was from Monday. Talk about hot off the presses!



    'Rekd teh Gratitude

    Matt
    San Diego, Ca

    ___ o o o_
    [l_,[_____],
    l---L - □lllllll□-
    ( )_) ( )_)--)_)

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  15. #15
    Registered
    Join Date
    Jul 2003
    Location
    Charlotte NC USA
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default

    We aim to please

    Kind Regards,
    Aphextwin


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

V9.1 SP1 Release for all 9.1 users

V9.1 SP1 Release for all 9.1 users