| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Mastercam Discuss Mastercam software here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
06-01-2010, 07:24 AM
| |||
| |||
This is the first time I've used X4 and the toolpath setup is different to the older versions. I used to be able to just set the depth of a countour toolpath but in X4 I can't work out how on earth to do it. Any help is appreciated  |
|
#2
06-01-2010, 04:41 PM
| ||||
| ||||
| You will find under linking in the ops manager tree.
__________________ (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) Cadcam Mastercam Instructor , Programming Consultant and ME (Manufacturing Eng) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Newbie- contour depth control | George777 | Mastercam | 6 | 02-25-2010 07:21 PM |
| Arm contour recipe | silwandr | Musical Instrument Design & Construction | 4 | 01-13-2010 06:03 PM |
| Problem- x4 Contour and Depth | vdauer | Mastercam | 2 | 01-13-2010 10:32 AM |
| Problem- Contour help | johny0407 | Mastercam | 1 | 05-14-2009 08:15 AM |
| need help with 3D contour | OzDragonflyer | Mastercam | 4 | 12-03-2008 11:03 PM |
| | |
Linear Mode
