Need Help! Edit Subsequent Peck - CNCzone.com-The Largest Machinist Community on the net!

Tony Salerno · #1 04-24-2010, 08:36 AM

For whatever reason my Edit Subsequent Peck is grayed out all of a sudden. I used to be able to edit my peck depths now they are set at .1 and are grayed out un-editable. Would like to know how to get this feature back.
v9.1

ObrienDave · #2 04-24-2010, 11:03 AM

After generating the toolpath the first time, try re-selecting the parameters of the toolpath in the operations manager.
I think you will find the grayed out boxes are now editable.

Superman · #3 04-24-2010, 05:08 PM

Have you changed the drill cycle ie now doing a spotting, tap or borimg cycle ?

It should/may be available on the deep hole peck ( G83 )

It should be on for your custom cycles, yes ?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need Help!- Fadal peck tap ?	machine time	Fadal	6	02-10-2010 04:22 PM
First pass different to subsequent passes	stugrey	DIY-CNC Router Table Machines	1	12-12-2008 09:53 AM
To Peck drill or not to peck dril.....	Crashmaster	General Metalwork Discussion	20	08-23-2008 11:33 AM
Peck Drilling	RBrandes	Haas Mills	10	06-18-2007 07:03 PM
subsequent peck parameters ?	abcdef	Mastercam	2	11-29-2006 09:57 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)