Need Help!- X3 begineer need help

[amarendra43]

Hi
I am a begineer mastercam programmer. I downloded tutorial 7 and got my geometry done it went well but after that i follow the process to to creat 3-D wirefram did exactly as it says, but in isometric view I dont get z depth view. it looks like flat drawing. Most probably my starting was not right. May be I did not got the first page A-4 right. What is on page A-1thru A-6 etc?
I did work with ver.6 long time ago. I used surf cam 11 years ago and then on Gibbs for last 6 years. I am trying to be a self learner with past experience.
Please help me and if any gentel man like to help me with his e-mail that I can use time to time to ask him some question.
I am new to this site, Please help me so I can move ON.
Thank You all. I really apriciate any help.
Amar

[shneek]

Can you get any 3D to work? try drawing a square switch view and go to solid at the top and choose extrude and select the square with the chain ring logo and hit ok.

[Toonz]

If you have 3D in the other views you have 3D in ISO too. Just try rotating it a little bit manually.

[Steve Arteman]

Amar,

Below are some resources that may help.

Surface CD Link:
http://cad2cam.net/mastercamx_basic_surface%20.html

Solid video Link:
http://cad2cam.net/solids1.htm

Steve Arteman
www.cad2cam.net
steve@cad2cam.net

[cadcam]

Can you share your file so we can see what you have done and how to fix it. I was wondering to about how you used the planes to build.