My dad passed away this month, and we are working on getting everything sorted out. One of the biggest chunks is his lathe, an old Logan. Since I'm the one in the family most familiar with the hardware, I was asked to see if I could find out how much it's worth and how best to get that out of it.

It's model number is 2557vlh, I'll have to double check, IIRC it's an 8x22 or so machine. It's in pretty good shape, ways are rust free and a bit stiff, but it hasn't been oiled in a few months at least so I think there's some gel in there. Might need a bit of work to get going but nothing hard. 3 phase converter will go with it, he has 3 and 4 jaw chucks, miscellaneous tooling, I remember he said he had gears for metric threading. It doesn't have a taper attachment, just the compound.

Just looking to see what we should be going for on Ebay for a local pickup. It's in St Charles MO if anyone's interested. I'll get some photos up as soon as I get them resized.

Similar Threads: