Replicator user needs advice on Makerbot Desktop


Results 1 to 3 of 3

Thread: Replicator user needs advice on Makerbot Desktop

  1. #1
    Member nelZ's Avatar
    Join Date
    Jun 2008
    Location
    US
    Posts
    262
    Downloads
    0
    Uploads
    0

    Default Replicator user needs advice on Makerbot Desktop

    Hi,

    I've got a FlashForge Creator Pro. The Replicator software does not do what I want.

    Does Makerbot or any other software allow control over the printer As It Prints? That would be good. I also want a easier way to control the build temp. As such I was told to go into the Gcode and modify it there. I would think there is a way to send that info thru the USB connection....As it prints If possible.

    All help is appreciated.....

    Is this the champagne bottle breaking on the bow of this sub forum?

    Nelson

    Similar Threads:
    i build the braces that keep american teeth straight......tick tick tick


  2. #2
    Registered
    Join Date
    Sep 2013
    Location
    USA
    Posts
    147
    Downloads
    0
    Uploads
    0

    Default Re: Replicator user needs advice on Makerbot Desktop

    I think s3d may allow you to change the hotbed temps throughout the print but I am unsure as I have never used it.



  3. #3
    Registered
    Join Date
    Sep 2013
    Location
    USA
    Posts
    147
    Downloads
    0
    Uploads
    0

    Default Re: Replicator user needs advice on Makerbot Desktop

    Also keep in mind that the bed level will change as the temp changes.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Replicator user needs advice on Makerbot Desktop

Replicator user needs advice on Makerbot Desktop