Vacuum belt?

Results 1 to 2 of 2

Thread: Vacuum belt?

  1. #1
    Registered
    Join Date
    Apr 2017
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Vacuum belt?

    We're pretty stumped at work about the vacuum system at my work. We've just replaced the belts again since they keep breaking from a misalignment issue, but we still have an issue of the belts moving when starting up. My question is if this is normal? We don't really want to keep replacing belts or have to replace a whole new unit. Any insight is appreciated.

    The vacuum system is a multicam tv425
    A link to the issue: https://youtu.be/SrwcR5bmXy0

    Similar Threads:


  2. #2
    Member
    Join Date
    Jun 2010
    Location
    Australia
    Posts
    4252
    Downloads
    4
    Uploads
    0

    Default Re: Vacuum belt?

    Need photo of pulleys. Take cover off.
    Pulley alignment is not normally difficult.

    Cheers
    Roger



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Vacuum belt?

Vacuum belt?