any 800 grit oil stone should work just fine.
Hi All,
What do you all use for repairing dents and high spots on your CNC machine tables? Also, where could you buy one?
I've got a Tormach 770, and have bought two grits of 8" Diasharp sharpening plates to keep things smooth. However , I find they have quite a few high spots, and do more damage than good in the end, making a lot of deep scratches in the honing process.
I've been looking at getting a few generic stones instead, but can't seem to find anything of high quality, or of the correct fineness.
Thanks,
Mike
Similar Threads:
any 800 grit oil stone should work just fine.
Luthier/Woodworker/Machinist in NS, Canada.