I'm considering the addition of a Multicam 1000 series router to my shop. Does anyone out there happen to be running one along with MadCAM? I see there are two post processor files out there but I remember having to tweak my Shop Sabre Post Processor a bit to get it to work properly. Anyone happen to have a Post Processor that they know works with a newer multicam? I have a friend that has access to one that I'd like to run a few tests on before investing in one myself. Any help would be greatly appreciated.
Attached is a 3-axis post processor for Multicam. It was made back in 2010, but I think it will work. It's using standard G-codes. If needed, you are welcome to send some sample output code and I will customize a post processor for you.
/Joakim