Yes, we need this too. I've sent an e-mail to Joakim a couple of weeks ago, so hopefully there will be a fix soon.
Dan
Does anyone have a fix for the "along curves" multiple Z levels problem. I am experiencing this on the latest Madcam Release on Win 10
I really need this to work.....
Similar Threads:
- Need Help!- Curve Side on profiling operation - "on curve"
- Problem- X Axis "Goes Off Pattern", "Awry", "Skewed", "Travels"
- Need Help!- Low resolution curves using "Create Curve on Edges" or "silhouette boundary"
- Need Help!- Complete uninstall for X(or- how do I get my "levels" to appear again in status bar?)
- "Trim Subdivide" a curve, 2D
Yes, we need this too. I've sent an e-mail to Joakim a couple of weeks ago, so hopefully there will be a fix soon.
Dan
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thanks for letting me know I'm not alone in this.
Unfortunately not fixed in the Sept 12th release.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I have found a work-around if your engraving is 2D.
Create a path and it will fall on the curves. Use the gumball and move it down your depth of cut. Create a path again, and use the gumball to move it down to the 2nd depth of cut. And so on...
When you post, they will post in the order created so it will replicate the behaviour that is missing.
Dan
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)