Post Processing for Axiom AR6 Pro with MadCam 5


Results 1 to 5 of 5

Thread: Post Processing for Axiom AR6 Pro with MadCam 5

  1. #1
    Registered
    Join Date
    Sep 2016
    Location
    United States
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Post Processing for Axiom AR6 Pro with MadCam 5

    Hi Everyone,
    I have an Axiom AR6 Pro, Rhino 5 and MadCam 5 v3. I'm just getting started, and I saved a simple pocketing tool path as a test. When I attempted to run the file on the machine, the spindle lowered to the surface of the workpiece, but then it just sat in the home position, spinning. It engraved the surface just a tiny bit in that spot, but never moved to the actual cut locations. I'm attaching a couple screen shots to see if I'm missing something in my post processing. Thanks very much for your help!

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Post Processing for Axiom AR6 Pro with MadCam 5-gcode-png   Post Processing for Axiom AR6 Pro with MadCam 5-postprocess-png  


  2. #2
    Member Dan B's Avatar
    Join Date
    Apr 2003
    Location
    Ontario
    Posts
    1354
    Downloads
    0
    Uploads
    0

    Default Re: Post Processing for Axiom AR6 Pro with MadCam 5

    Line N3 does not have a feed rate. Not every line has to have one as G01 is modal (assuming it is on your controller too). However, you precede this line with a rapid move. Try manually putting a feed in N3 and see what happens.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Registered
    Join Date
    Sep 2016
    Location
    United States
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Dan B View Post
    Line N3 does not have a feed rate. Not every line has to have one as G01 is modal (assuming it is on your controller too). However, you precede this line with a rapid move. Try manually putting a feed in N3 and see what happens.
    I found that MadCAM is not automatically generating code to indicate that the drawing (and tools, tool paths) are imperial units. Because my machine's handheld controller wants to see metric info, it needs to see G20 in the line of code where the parameters are set (N1). By manually adding the G20 text, I'm able to run the tool paths now, BUT, my feed rates are still incorrect. As a test, I did a drawing in metric units and used metric tools, and still got incorrect feed rates.
    A friend who uses the same machine (Axiom AR6 Pro) has had no problems with code created in RhinoCAM, including imperial info.
    Hoping I can get a new post processor to fix this, rather than buying more CAM software. Super frustrating process, as I like the integration of MadCAM into Rhino, but can't get code that makes the machine happy.

    Last edited by chester442; 08-28-2017 at 09:52 AM.


  4. #4
    Member
    Join Date
    Oct 2009
    Location
    Australia
    Posts
    96
    Downloads
    0
    Uploads
    0

    Default Re: Post Processing for Axiom AR6 Pro with MadCam 5

    Chester442,
    All Post Processors can be modified to suit your needs.
    Most that are provided are stock standard.
    For example G21 and other start codes can be in your Post Processor.
    Read the Help file on Post Processors in madCAM to see what can you can do.
    Once you have tailored it to suit Axiom AR6 Pro it will always out put the G-Code as you want it to.
    Regards,
    Mauri.



  5. #5
    Member Dan B's Avatar
    Join Date
    Apr 2003
    Location
    Ontario
    Posts
    1354
    Downloads
    0
    Uploads
    0

    Default Re: Post Processing for Axiom AR6 Pro with MadCam 5

    Also, make sure your tools have speeds and feeds saved that are appropriate for the units you wish to work in.

    Dan

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Post Processing for Axiom AR6 Pro with MadCam 5

Post Processing for Axiom AR6 Pro with MadCam 5