Making a 4 Axis Simultaneous profile cut using existing Drive Surface (bug?)

[Mauri R]

Hi,
Has anyone tried to make a 4 Axis Simultaneous profile cut using existing Drive Surface on a rotary model?
The new madCAM version does not seem to be able to make the proper cut anymore.
If you have an existing profile cut and recalculate that works, but a new profile cut, it seems to make a normal non Drive Surface cut?
I have advised Joakim.
Can anyone test this to see if they have the same problem.
Regards,
Mauri

Similar Threads:

• Problem- Latest madCAM making 4 Axis Drive Surface
• Picking an AC drive for an existing motor
• Problem- Sim 5 axis doesn't work: says there's no drive surface
• surface quality of 3+2 vs. simultaneous CAM programming
• New Machine Build- Chasing an existing thread or making one longer