Any tips?
I'm trying to just come straight inside this hole, it keeps coming in from the side then into hole.
My only option with this toolpath is ramp in. I've tried 0, 45, 90, 180. Always looks just like this. Suggestion?
Actually this isn't lead in... it's the cutter coming out of hole in the toolpath and going back in. It keeps wanting to wrap out instead of just cutting mesh like I want
Similar Threads:
Any tips?
I can't really tell what's going on from that picture.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)