Are you posting code via computer. If so just offset your drawing with a separate line and just make a separate tool path (put these lines in a red layer so you know it is your offset). This way no math.
Hi folks as title I have to machine a rad going into a rad of the face of some stainless steel. G41/G42 doesn't work as it's in fanuc easyturn. Tool will be a 0.4 rad 35 degree insert
It's a lathe btw!
Cheers
Similar Threads:
Are you posting code via computer. If so just offset your drawing with a separate line and just make a separate tool path (put these lines in a red layer so you know it is your offset). This way no math.