Please I need help I have a machine MORBIDELLI u46 since 1991


Results 1 to 9 of 9

Thread: Please I need help I have a machine MORBIDELLI u46 since 1991

  1. #1
    Registered belgakras's Avatar
    Join Date
    Mar 2012
    Location
    Kosovo
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Please I need help I have a machine MORBIDELLI u46 since 1991

    Please I need help.

    I have a machine MORBIDELLI u46 since 1991
    I must know how to find a program in which they can prepare drawings in
    1d, 2d and 3d.

    Since my machine to make the cut. I want to say that the machines
    make cuts that are set by the program.

    Program that you propose please tell me where I have to do the installation on a computer or program that owns the machine.
    How to save the file and transfer the design to the machine.

    MORBIDELLI u46 year 1991 version 63


    Please have the opportunity to be prepared to help as any cutting and how to send fili the machine that machine to do work that I ask from it.
    I do not speak good English sorry.

    Hope all the best going with dihmoni about the program.


    Similar Threads:
    Last edited by belgakras; 03-03-2012 at 03:58 PM.


  2. #2
    Member
    Join Date
    Sep 2008
    Location
    MExico
    Posts
    100
    Downloads
    0
    Uploads
    0

    Default

    the sofware is Aspan o Alphacam



  3. #3
    Registered
    Join Date
    Apr 2012
    Location
    malaysia
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default

    dear sir ,
    as i known you are having U46 morbidelli,

    i also having one machine brand morbidelli model U40,
    but i have lost my ladder diagram.

    can you help me up to have this ladder diagram??

    and i have some problem with this machine,
    there is no screen when this machine power on.
    and can not reset to return home.

    thanks for reply, and help me up.



  4. #4
    Registered belgakras's Avatar
    Join Date
    Mar 2012
    Location
    Kosovo
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    I've installed the beginning now works perfect.
    The problem remained to program one or I have changed the figures of the program and have the following error.

    But now is OK

    Last edited by belgakras; 04-16-2012 at 07:12 PM.


  5. #5
    Member
    Join Date
    Sep 2008
    Location
    MExico
    Posts
    100
    Downloads
    0
    Uploads
    0

    Default

    I dont understand the problem!!! the screen the machine do no turn on? or do no reset for return home position?



  6. #6
    Registered belgakras's Avatar
    Join Date
    Mar 2012
    Location
    Kosovo
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    And it is hard to understand,because I speak English but I make spelling mistakes

    In the event that I have prepared a design in ARTCAM PRO and save us. PGM 3MB
    How to transfer from computer to machine

    Machine is only with the floppy.


    Show me an example if you can how to transfer file. PGM from the computer in the machine.

    Morbidelli is just with floppy disk.



    Hopefully that will help



  7. #7
    Member
    Join Date
    Sep 2008
    Location
    MExico
    Posts
    100
    Downloads
    0
    Uploads
    0

    Default

    Can you send me a copy the your program? I would like only as example
    Can you send me some pic of the CRT?



  8. #8
    Registered
    Join Date
    Apr 2012
    Location
    england
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    hi i all so have a u46 and the monitor i dead and i have no manuals or instructions
    would be gratfull for some help or to be pointed in the right direction

    thanks



  9. #9
    Registered
    Join Date
    Feb 2014
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    pls i have morbadilli u 26 model 1991 i want to know how i can run it by artcam pro but it is with floppy desk i want quick replay pls



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Please I need help I have a machine MORBIDELLI u46 since 1991

Please I need help I have a machine MORBIDELLI u46 since 1991