New Machine Build Spindle control problem, possible signed 16bit - 12bit mismatch - CNCzone.com-The Largest Machinist Community on the net!

		CNCzone.com-The Largest Machinist Community on the net! > Machine Controllers Software and Solutions > Mach Software (ArtSoft software) > Machines running Mach Software
New Machine Build- Spindle control problem, possible signed 16bit - 12bit mismatch

Machines running Mach Software Discuss your set-up and experiences running your machine using Mach software here.

This forum is sponsored by:

11-12-2009, 12:31 PM

Join Date: Nov 2009

Location: USA

Posts: 1

Spindle control problem, possible signed 16bit - 12bit mismatch

Problem solved with updated plugin from Ajax.
-Will

Last edited by RallyRat; 11-13-2009 at 11:53 AM.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
(X=0, Y=0) mismatch	apimentel	G-Code Programing	2	08-04-2009 02:00 PM
BG806 Device Type Mismatch	Petro	Fanuc	0	07-16-2009 07:55 PM
Help with THK rails & blocks (mismatch?)	daemonfly	Linear and Rotary Motion	6	03-06-2009 07:31 AM
6-16bit processors vs not in early 90's CONTOURING	carbidecraters	Fadal	0	02-24-2009 11:20 PM
Partner 1 Series G- CMOS display type mismatch	life3970	Milltronics	0	01-31-2008 09:00 PM

All times are GMT -5. The time now is 07:38 AM.