| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Machines running Mach Software Discuss your set-up and experiences running your machine using Mach software here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
05-03-2007, 10:00 PM
| |||
| |||
I am having problems with one of my motors. I toggle the motor in a positive direction at different intervals. The motor will turn the correct direction during the first few intervals and then the motor will start going the other direction for an interval. I am using Mach3 and in the process of learning this program and setting up the CNC machine. My other two motors are running fine. Is there a problem with the motor or a Mach3 setting??  |
|
#2
05-08-2007, 02:41 PM
| |||
| |||
| Could you swap two of your motors and see if the problem stays with the suspect motor ? |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problems with motor stalling due to motor/lead screw alignment | Bimmerkc1 | DIY-CNC Router Table Machines | 3 | 01-24-2010 06:12 PM |
| Motor problems | johnm99 | Stepper Motors and Drives | 1 | 03-03-2006 02:11 PM |
| Help with Stepper Problems | ckrantz | Stepper Motors and Drives | 2 | 12-31-2005 11:08 PM |
| Motor Problems | MikeAber | Industrial Hobbies (Support forum) | 7 | 12-13-2005 11:22 AM |
| Stepper motor torque problems? | Chris D | Stepper Motors and Drives | 4 | 06-07-2005 01:15 PM |
| | |
Linear Mode
