Hw I can drive lathe on mach3 ?

[CNCsector]

Hi,

Hw I can build lathe 3 axises and drive it with mach3 ?
Can anyone guide me in this project ?
I not need to the mechanical parts building instructions of lathe ,but i need to a schematic and Pcb of controller between pc and stepper motors.
Also, I need to know the (game) joystick control settings in mach3 and controller schematic of it to drive stepper motor.

thnaks

[CNCsector]

No replays

Ok, Can anyone give me joystick program & circuit to drive a stepper motors.
somebody speaking about joystick32.ocx
another persons speaking about joycon program
also another one speaking about using a pc homemade connected circuit to drive stepper motors by joystick .
I made a search about all programs and circuit above, but no helpful answers to me.

Pls, Anyone have a same project, he nice to give me help.

regards

[PoppaBear10]

what do you want your "3rd" axis to do, on your lathe?............

You will have to go into screen designer to drop a 3rd axis on the stock lathe screen unless you want to build your own.

There are several advertizers on this site, who sell, stepper driver pcb plans, or kits