LinkBack URL
About LinkBacks
In what context? Where did you hear it from?
Al.
| | |
guys what does too fast for pulley means? I'm not even using pulleys!
In what context? Where did you hear it from?
Al.
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
it's in mach3 screen down at the bottom it says that
Go to Config > Spindle Pulleys and increase the max rpm and the message will disappear.
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thank you so much guys!
Ger, Im just testing out Mach trying to get a feel for it and I too am getting this same message. However I dont see "Spindle Pulleys" under config. I do see "Calibrate Spindle" and I have changed those numbers a bunch of times but it keeps defaulting for some reason.
I don't have Mach3 here, but under the Config menu, there should be a "Spindle Pulleys" listed. What version of Mach3?
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Its Mach3 Version R1.83.027. All I see is "Calibrate Spindles".
Why are you testing a version that was released about 7 years ago??? That's why you can't find the pulley option.Ger, Im just testing out Mach trying to get a feel for it
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Wow had no idea it was that old of a version. I got it along with some cad and other software I bought off a friend a couple years ago and thought at the time it was the current version. So I knew it was a couple of years old but not 7!! LOL
At any rate it runs fine on my system. No problems that I have seen so far so Im going to keep it until that changes.
Originally Posted by ger21
Posting Permissions
| | |
