Mach2 has not been around for 15 years.
If you don't need any features that Mach2 does not have, then I would stay with Mach2.
I have been running Mach 2 for somewhere around 15 20- years with zero problems. Is there any good reason i should upgrade to the newer mach versions? Windows XP is very stable
Similar Threads:
- Mach 3 parts counter and hour meter mach...
- Need Help!- Mach 3 - Driver Test results VMWare player (XP -> Mach 3)
- Need Help!- Mach 3 + G540 + UC100 + WJ200 = Can't run spindle from Mach 3?
- Mach CNC Keys!!! (Mach function specific CNC Operators Panel, 2cd keyboard)
- Confused: Mach Turn, Mach Mill, Mach 2/3 ?
Mach2 has not been around for 15 years.
If you don't need any features that Mach2 does not have, then I would stay with Mach2.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)