Moriseiki lathe CL-25 Programming Manual

[david rendon]

Hello everybody,
Does enyone know a link or something to download the programming manual of a Moriseiki CL25 lathe?
Thanks a lot Bro's

[gilchapa]

David,

What type of control does this machine have? It should say over the TV screen where you can see the program running.

[david rendon]

MSC-518
Sorry 4 the delay

[underthetire]

So, you need a fanuc 18T programming manual. I'm sure someone has a PDF. My email won't let me send large files over 30mb..,,

[GONorman]

David did you ever locate a Fanuc 18T manual? Not that I can help you out...I am searching myself. Thought maybe you could point me in the right direction.

[david rendon]

no havent =( ..... I decided to learn how to live with out it

[txcncman]

What questions do you have that you think would be answered by the manual?

[david rendon]

a lot !!
for instance I want to know how to tap a hole

[txcncman]

You will have 2 possibilities depending on the control and what options have been enabled/installed:

1)
G01 Z-1. F0.05
M05
G01 Z0.3 M04
M05

2)
G84 Z-1. F0.05

[GONorman]

I am trying to set up using live tooling and second spindle. I am assuming the second spindle will be axis B. After setting Z0.0 and making chips when using one spindle, I am lost. The live drill will be drilling when the part is in the second spindle, so do I touch off the drill to face of part in spindle 2, take # from machine position page and put it in Z offset for drill? I have to get the part to the second spindle first and don't have a clue.

[gilchapa]

I do have the Fanuc 18T manual (all of them Programming, Connection, Maintenance). PM if you still need it.

[alnatshax]

i need help with mori seiki tl-1 i need help it shows blackscreen wit red led on the power unit .