We have a Weiler Lathe machine fitted with Sinumerik 805 control. Machine can startup and we can move the axis in Jog mode, but unable to use the machine because have no information about how to operate this machine and the programming sequences and all.

As of now, without "Zero return" of the machine X & Z axis, Sinumerik 805 control does not even release pages associated with spindle control, MDI or programming sequences. not even machine parameters comes on screen. We have have to start from scratch to learn & operate this machine.

I have downloaded from Siemens site, these Sinumerik 805 control manuals, but they did not seem to suit with our Weiler machine. I believe, on this weiler E90 Lathe Machine, its Sinumerik 805 control has been customized with a front end s/w from Weiler. So, the operator screen looks very different from what is seen on Siemens manuals, unfortunately...

It would be very pleasing if anyone of you have any Operations, Maintenance or Programming manuals for a Weiler Lathe machine fitted with Siemens Sinumerik 805 control for us to get started with this machine and give our machine a new life.

Thanks for your time.

regards,
san

Similar Threads: