Hey everyone,

New to the forum and already begging for help. I recently acquired an old Ikegai TV4 mill with Fanuc 18-M controller. Pretty new to CNC and have never touched a Fanuc controller before, so this is going to be a lot of struggle for a while. I was able to get the machine powered up, all axes jog smoothly and zero without issue. Spindle runs quietly and in general the machine seems mechanically sound.

The first problem was encountered when attempting to run a tool change. The spindle heads over to the ATC, stops, and I get a PC error code 082. I don't have the manual for the machine or the controller, so if anyone has or knows where I can get access to them, that would be incredibly helpful.

Additionally, if anyone has any ideas for how to solve this problem, that would be great too! I have no idea if there is something wrong in the programming, the ATC, the door to the ATC, etc.

Thank you all in advance for looking and any help you have time to give!

Similar Threads: