- Need Help!- HEIDENHAIN 151 B PARAMETERS
-
Registered
HEIDENHAIN 151 B PARAMETERS
Hello to all, I have recently bought an old Fehlmann Picomax 51 with Heidenhain TNC 150 b control. The batteries 3 "AA" cells were out, so the machine parameters were lost too. From the internet i found some posts with machine parameters for a simmilar machine, but when I press the yellow axes motor power button and proceed to execute the "pass-over" process to "home-out" the three axes. The machine is set to start with x - axe first and as she heads towards (minus) the limit switch, she passes thrue it and stops. On the display there are three errors - PC ERROR -05, 18, and 30. I am at a dead end here. Can anyone help me please
Similar Threads:
Last edited by Borislav; 11-17-2017 at 02:22 PM.
-
- Need Help!- HEIDENHAIN 151 B PARAMETERS
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Reply with Quote