Need Help! Leadwell MCV-OP spindle belt specifications?

Results 1 to 2 of 2

Thread: Leadwell MCV-OP spindle belt specifications?

  1. #1
    Registered
    Join Date
    Nov 2017
    Location
    Finland
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Leadwell MCV-OP spindle belt specifications?

    Our old MCV-OP (with fanuc control if that matters), at a makerspace in Helsinki, disintegrated its spindle drive belt today. So now we are hunting for a replacement and the first problem seems to be finding out the specifications for the belt. Trying to search for that information online didn't produce any results. Any help is appreciated.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Nov 2017
    Location
    Finland
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Leadwell MCV-OP spindle belt specifications?

    Apparently the problem wasn't a shredded belt on further investigation... And for others maybe looking for this same info in future the belt is HPD Powergrip 800-8M and 30mm width.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Leadwell MCV-OP spindle belt specifications?

Leadwell MCV-OP spindle belt specifications?