The usual DRC colours were:
Blk DC-common
Red +v
Orange A
green /A
Yellow B
Blue /B
Brown Z
Gray /Z
Al.
Hello all
I am new to the CNC world and thought, what a better place to learn.
I recently purchased an older Techno/Isel CNC router table and am upgrading all the electronics.
I am building a new control box with 3 Gecko G320x drivers and a PMDX-126 break out board.
The table has Techno/Isel servo motors with DRC TK731 8E21 500-B encoders.
My problem is that I cant find any specs online showing what wire is what to connect the above encoders to the new Gecko drives.
I have found some data sheets online for other DRC encoders showing the wire info and they all seem to have the same colour codes, but am a little leary to just wing it.
So I thought I would use all of your experiences.
Any help would be much appreciated.
Cheers
Wayne
Similar Threads:
The usual DRC colours were:
Blk DC-common
Red +v
Orange A
green /A
Yellow B
Blue /B
Brown Z
Gray /Z
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
In addition these encoders are 5v dc suplied, so +V means +5V specificly