hello i am new here i already had some info of this web site but now i have a problem with my cnc lathe
i bought it knowing the main spindle did not work the brushes where worn out
now i got it at my home and i fired it up and the machine work the tool turret and the x and z axis work's fine but then i ran it into the end switch and by then i could not control a thing any more and i got error 401 servo.
i solved that by replacing a blown fuse but after that i got the error 410 and or 411 and i was solving that problem i looked at the brushes but they where fine and i was looking at some stuff on the web and then the alarm of the main motor went of and the led on the main spindle driver 88L lit up and now i don't have any idea what to do

if i would get the manuals and electric drawings it would help me allot



i solved this problem and after solving this i got the errors 411/410



and now i got this on top of the 410/411 errors

and here just some pictures of the machine






here it is at my place


getting it on its place was a lot of sweat and tears and a broken back


and here it sits in my way to small garage

thanks in advance

simon

Similar Threads: