Lynx-80 Plasma Table

Results 1 to 3 of 3

Thread: Lynx-80 Plasma Table

  1. #1
    Member
    Join Date
    Apr 2007
    Location
    USA
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Lynx-80 Plasma Table

    HI Everyone,

    Ive come into a old Plasma Cutter and Lynx 80 and wondering if anyone could help with a manual or knowledgeLynx-80  Plasma Table-img_00101-jpgLynx-80  Plasma Table-img_00141-jpg

    THe table has a panograph head but I have no Idea of how to use it. Also it has a hook up for a PC via a RS232 port. Circa 1997

    Thanks,

    Dave

    Similar Threads:


  2. #2
    Registered
    Join Date
    Mar 2014
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Lynx-80 Plasma Table

    Hi Dave.
    I ran one of these a few years ago.
    What are you looking to do?
    There is a basic shape library that is fairly easy to use.
    For custom parts we used Surfcam with a custom post processor.
    The posts are a " .nc" file format.



  3. #3
    Registered GcodeEng's Avatar
    Join Date
    May 2018
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Lynx-80 Plasma Table

    Old post I know, but do you have a sample file? and some settings for the RS232



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Lynx-80  Plasma Table

Lynx-80  Plasma Table