Wanted - manual for ISEL PC CV-3 servocontroller/ ISEL GFV flatbed

[rc-worcs]

Could anyone point me in the direction for getting a manual for the ISEL PV CV-3 servocontroller. Specifically the pinouts for the servo axis connectors on the rear.
I've tried the various ISEL websites and no luck. Willing to pay for scanned/photocopy.

I think the machine is a GFV flatbed from around year 2000. I would like to reccomision it as it's a lovely beast, but bought with cables cut through to Penguin 2 control unit. Hence the pinouts required.

Also any other machine documentation would gladly be appreciated. Particulalry electrical schematics.

thanks all.

Similar Threads:

• Wanted Isel router manual.
• Techno / Isel / Tecno Isel confusion
• Need Help!- New Controller for Isel
• Wanted to buy: Used Techno-isel machines.
• Techo-Isel

[neptunier]

maybe here https://www.isel.com/en/support-down...lektronik.html you find something. i had an old upmv/4 servo card from 1998 and they still have all the manuals on their website.

michael

[rc-worcs]

Thanks I have tried there. They have a few of the manuals for the internal cards, but not the pinout for the 19" rack, or the safety module.

[rc-worcs]

I thought I would post an update on the GFV machine in case it is of use to someone...

Well I took the servo axis apart and traced all the wiring at that connector, and then took the rack unit apart and traced the pinouts from the servo power cards to the connector on the rear.
So I now have the pinouts, if anyone needs them please let get in touch.

If anyone happens to have any documentation for the SK safety module SVW-1 that would also be useful.
many thanks.