Need Help! nakamura tome TMC 20 enabling c axis and sub spindle mcode

Results 1 to 6 of 6

Thread: nakamura tome TMC 20 enabling c axis and sub spindle mcode

  1. #1
    Registered
    Join Date
    Aug 2014
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default nakamura tome TMC 20 enabling c axis and sub spindle mcode

    Please help to enable the c axis in Nakamura Tome TMC-20ii 18t fanuc control. mcode c axis listing for c axis and sub spindle.

    Similar Threads:


  2. #2
    Member
    Join Date
    Feb 2009
    Location
    usa
    Posts
    6028
    Downloads
    0
    Uploads
    0

    Default Re: nakamura tome TMC 20 enabling c axis and sub spindle mcode

    Did this come from the factory with C axis? Typically if not, its not something you cant just turn on. Spindle sensors are different, sometimes different motors, drive options and electrical configuration etc.



  3. #3
    Registered
    Join Date
    Aug 2014
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: nakamura tome TMC 20 enabling c axis and sub spindle mcode

    Machine have caxis motor and drives but parameter not enabled and didnot have any manuals or mcode lists. while giving M91 it goes for orientation of spindle but not enabling the caxis drive . M91 not get finish signal too.



  4. #4
    Registered
    Join Date
    Apr 2017
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: nakamura tome TMC 20 enabling c axis and sub spindle mcode

    Can Someone Help?



  5. #5
    Registered
    Join Date
    Aug 2014
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: nakamura tome TMC 20 enabling c axis and sub spindle mcode

    Quote Originally Posted by kartemmak View Post
    Can Someone Help?

    what help required?



  6. #6
    Registered
    Join Date
    Apr 2017
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by dann0078 View Post
    what help required?
    I need c axis m codes
    Nakamura Tome Tw 20 Fanuc 18-T control unit



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

nakamura tome TMC 20 enabling c axis and sub spindle mcode

nakamura tome TMC 20 enabling c axis and sub spindle mcode