thought Id bump it just to double check here
thanks
JAK
does anyone have the manuals on this machine?
I am new to C&C machining and this machine and have no manuals on it :-(
thanks and have a great weekend
JAK
Similar Threads:
thought Id bump it just to double check here
thanks
JAK
trying again? anyone? not even a flaming for bumping?
have a great week :-)
JAK
Jack,
I have some manual that most probably can work for you. What exactly are you trying to get. I have Kitamura parts list, kitamura operating manual, kitamura maintenance manual, Fanuc AC spindle servo unit (Maintenance manual and operators manual and Fanuc Maintenance munual that came up with this machine and based on my experience they match with this model or my work for you.
Oh thank you I thought I was doing something wrong.... or having some etiquette mis understanding with this board
opperators manuals would be great and maybe the Fanuc manual....
you are far away though.... and I dont know if it is over endeavor
if you had a good copy machine you could digitize them pretty easily
we have a good coppier here I would be happy to pay post both ways if it werent too much trouble
have a wonderful weekend
JAK
Last edited by jak stoll; 03-15-2012 at 12:43 PM. Reason: changed reply because I dident see a response
Let me try to digitize them and send them to you.
I have a 1983 Kitamura My-Center1 CNC Vertical Machining Center 3M Model C. I purchased in 2009 and no manuals came with it. Kitamura sent me a parts list manual for a M - 1/485 that was the best they could do. Now I am having problems with the linear bearings under the x-axis table and can not find the correct part numbers for it. Do you still have the M-3C parts list?