Hello All,

I have just changed out components on my newly purchsed used router to a PMDX122 breakout board and control software (Mach 3). The problem I am having is that after the configurations are complete I am getting some wierd stuff happening with the motors. While in the jog mode I am only getting every little movement, no matter what changes are made in the motor pulse details in Mach 3 and movement is only in one direction. When the other direction button is pushed it does nothing. I am thinking I have a wiring issue with the Anahiem Automation BLD75 motor drivers ( I only unhooked the wires from one controller and reattached them to the new one. They work because it was operating with the old Delta Tau controller and software.
I have looked through the manuals and the wiring looks correct but I know when to ask for help!

Help?

Thanks
Chris