We are getting an intermittent machine alarm on our BND42-TR Miyano Lathe. The LEDs on the Fuji Electric amplifier indicate a CT error or Circuit Trouble. I've been trying to locate a manual for this amplifier on the web, but am not having much luck. The amplifier is a RYG.50HA-RP.
Don't know if it's an internal circuit problem with the amplifier or is related to the encoder cable??
Anyone have a manual for this amplifier?
Hi dear users... i have a Miyano Lathe with some problem like the problem in this post but my Alarm is different. i received Machine Alarm LED on, The LEDs on the Fuji Electric amplifier indicate 1.-OP (letter O) or (number 0) Over Heat. (MOT) when i pushed the reset button, the alarm goes off. Then the machine work ok, but when i need turn off the machine and Turn on again, the alarm is ON again, does anybody know something about. Thanks in advance. Regards. Felipe from Cancun Mexico
Last edited by Tolesh; 10-29-2009 at 02:13 PM. Reason: Adding pictures