LinkBack URL
About LinkBacks
If this is a one-time transfer, it may be practical to send them to a service company that does this.
If on-going then it may be worth to get a BTR for the machine(s) in question and do away with the tapes & Tape reader.
Al.
| | |
I need a recommendation of a product or service that can handle my machine tool part program storage needs. I would like to store my part programs from older CNC (paper tabe readers) on my laptop through a RS232 connect.. Some machines have a 3.5 capabillity. I am looking for a 1 stop shop of a company that offers conversion cards and SUPPORT after you purchase them. Thanks for any thoughts!!
If this is a one-time transfer, it may be practical to send them to a service company that does this.
If on-going then it may be worth to get a BTR for the machine(s) in question and do away with the tapes & Tape reader.
Al.
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Thanks "Al the man" Can you rec a company(service) that specializes in machine tool comunications or hardware?
I believe Dan Fritz here on the zone has this type of equipment, if he cannot help, send me a PM.
Al.
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Try dolphin cad cam. I'm pretty sure they'd have what you are looking for.
Posting Permissions
| | |
