| | |
Hi there,my name is Edward Tong.
Currently first time working on this HMI and face this problem.
I have replaced the old E700 HMI,the version of the old unit is 1.02 and the new
replacement is version 1.20.After I have copied the program over the new unit,everything is working fine except all the process indications are not displayed.Only a black square for every machine status instate of a green dot for on and a red dot for off.
Anyone's help is very much appreciated.
Thank you.
HMI - Beijer E-700.
We have a HMI - Beijer E-700 interface.Its screen has got doubled and one is lapping on the other screen where data is put in.I can not adjust the screen.I don't have the programming software as well.Is there anybody who can help me?
Last edited by kovinbuddi; 09-10-2011 at 05:12 AM. Reason: Did not type it properly.
The Human Machine Interface is the device which lets a plant operator interact with the control system.
[URL=http://www.maxpdata.com/infysource.com/contact_us.php]infysource[/url]
Posting Permissions
| | |
LinkBack URL
About LinkBacks
