Hello, I´m from Chile and I have a Techno-Isel CNC Router, with a Router Colombo 3hp, 220V 1 phase, with this machine I have using a Teco FM-100 Fluxmaster Compact 1/2 to 10 hp AC Inverter.
The problem that I have is I did not work in the machine for a 2 weeks and when I start on the inverter yesterday, the inverter doesn´t start even the cooler and the digital panel it is not an electrical problem, because I have tested that.
The question is What can it be, I´m lost and somebody give some ideas or how can I test it to see what the deffect may be.
Thanks a Lot
Paul Lyaudet Sh.