problems setting up LVD MNC800 Brake press
We recently purchased a used brake press at work and are having some issues getting it set up. Initially we had some computer related issues but think we have them solved.
Our main problem now is that we're not familiar with how the controller "should" work
We do have the manual and are having the usual "translation " issues
We're also baffled by the Y axis value given after calibration(~4.5 ") I have run other CNC machines before and the position value after calb just doesn't look right to me.
Needless to say we cannot get the machine to run a program but we "may" have some setting wrong. I "think" I have figured out what the mute point is and how it relates to the geometry of the die/machine but we just need someone with expereince to give us those few last tips to get us going. There aren't many people wround that seem too familiar with this machine/control
Any help appreciated