EIA file transfer to Mazak Fusion

[grunemh]

Does anyone here in the USA use ProNC Communication Software to remotely transfer EIA programs?

[CNCRim]

I prefer Cable, because too much interfee..... with remote. Nice future but not recommend.

[psychomill]

I prefer Cable, because

It looks like it is cable....???? Not much "future" about it. Multiple DNC systems have been around awhile. Predator, Ascendent,... etc. Looks like a nice system though. Been using wireless systems for awhile too. No problems.

[Dan Fritz]

We do remote file callups for both EIA and Mazatrol CMT files with our PC-DNC Plus software, so I know it works. I'm not sure why your ProNC software doesn't work because I've never used it.

Can you send a file to the DNC system from the Mazak? If you can, (but you can't send one back), you're probably not sending the data in the correct format. Mazaks need that "%" at the beginning and end of the file. If you can't send files either way, double check to be sure that your baudrate and stop-bits settings are the same on the Mazak and on the DNC system.