Hi

I'm having some trouble to set my home made CNC working with the Home Switch

at this moment, only my Z is working fine here a screen when I push to the Z:

http://img710.imageshack.us/img710/2276/mach3z.jpg

as you can see from the TOP I have a GREEN square for the Z but not for they other Axe what does it mean?

also the pin in the middle right turn ON when I'm pushing at the switch

the X and Y isn't working, even If I push or release

here is the config of the inputs:

http://img819.imageshack.us/img819/6518/mach3inputs.jpg

If any idea came please let me know

thanks,
Q.