I have a chineese router with a RZNC-0501 controller. It been fine untill yesterday. I the controller wouldnt always come on then stopped completely. I narrowed this down to the switch and replaced it.
After i did this when i pressed home it didnt stop on the micro switches.
I basicly spent the whole of yesterday taking bits off, solving problems and creating them.
I now have everything working manually, returns to home moves to the furthest points etc.
However when i start a file it moves the near the middle of the bed to start.
I'm sure is a settign in the hand controller i have messed.
any help would be greatly recieved