Need Help! takisawa not completing tool change - CNCzone.com-The Largest Machinist Community on the net!

		CNCzone.com-The Largest Machinist Community on the net! > Machine Controllers Software and Solutions > Machine Problems, Solutions , Wireless DNC, serial port
Need Help!- takisawa not completing tool change

Machine Problems, Solutions , Wireless DNC, serial port Need help with your Machine or need a Machining solutions for , Serial Port, Cable problems between PC and all others DNC problems disucss them here!

This forum is sponsored by:

09-02-2009, 10:58 AM

Join Date: Aug 2009

Location: usa

Posts: 10

takisawa not completing tool change

permalink

I work on all my own machines but this ones killing me. I have a Takisawa V1e that won't complete the tool change cycle. The z axis goes up and carousel changes to the right tool but won't come back down to complete cycle. If I tell it M6T1 it goes up and rotates to tool#1 then stops before it comes down to complete the cycle.If I hit reset then M6T1 again it will complete the cycle perfect. It only completes the cycle on tool #1 if it's the carousel is on tool#1 already. I've checked to see if it's counting on the parameter page and everything I see is working right except for completing a tool change after M86 command. Any help would be appreciated!
Thanks Mike

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is Off HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need Help!- Takisawa tool change carousel help	premacpmc	General Electronics Discussion	0	08-31-2009 12:00 PM
Takisawa Mac-v4 tool changer Fanuc 6m	BrianM03	General Metal Working Machines	1	08-14-2009 10:38 AM
orient tool for tool change Hall effect?	Luslugger	CNC Machining Centers	0	04-24-2009 06:24 PM
NEED HELP : Takisawa mac v 2e tool changer	srosson	General Metalwork Discussion	0	02-15-2008 07:50 AM
How to change Tool change position(About MAZATROL T1 control)	liushuixingyun	Mazak, Mitsubishi, Mazatrol	5	07-07-2007 02:58 PM

All times are GMT -5. The time now is 05:57 PM.